Scrap Mechanic Wiki
Register
Advertisement


This is a guide on how to build a boat. This works in Survival & creative.

Parts[ | ]

One Person[ | ]

5 Bearings, Level 5 Thrusters, 78 Light Weight and Buoyant blocks (I recommend Wood Block 3), Level 2+ Driver's Seat, 5 Stacked Crates, Level 1+ Gas Engine, Gas Container, 2 Headlights, Switch, Button.

Two People[ | ]

5 Bearings, 2 Level 5 Thrusters, 108 Light Weight and Buoyant blocks (I recommend Wood Block 3), level 2+ Driver's Seat, Level 1+ Seat, 5 Stacked Crates, Level 1+ Gas Engine, Gas Container, 2 Headlights, Switch, Button.

Building[ | ]

1. Place your Lift in shallow water

Scrap Mechanic Screenshot 2020.06.27 - 20.09.00.23

2. If you are building the one person boat, make a 6x11 platform. If you are building the two person boat, make a 6x14 platform.

Scrap Mechanic Screenshot 2020.06.27 - 20.11.01.89

3. Place the Driver's Seat centered at the very front of your platform

Scrap Mechanic Screenshot 2020.06.27 - 20.11.37.18

4. If you are building the two person boat, place a Seat behind the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.11.54.99

5. Place the Gas Container behind the Driver's Seat(if it's a one person boat) or behind the Seat(if it's a two person boat)

Scrap Mechanic Screenshot 2020.06.27 - 20.13.41.74

6. Place the Gas Engine behind the Gas Container

Scrap Mechanic Screenshot 2020.06.27 - 20.13.51.82

7. Create a 2 block high wall behind the Gas Engine. This should use all of the rest of your blocks.

Scrap Mechanic Screenshot 2020.06.27 - 20.14.02.57

8. Move to the rear of your boat, and remove the 4 blocks(2x2 square) from the back wall. There should be a complete row of blocks remaining at the top.

Scrap Mechanic Screenshot 2020.06.27 - 20.14.13.85

9. Place a Bearing on the underside of the ledge.

Scrap Mechanic Screenshot 2020.06.27 - 20.14.25.03

10. Replace the 4 blocks on the back. Make sure all 4 are connected to the Bearing.

Scrap Mechanic Screenshot 2020.06.27 - 20.15.03.16

11. Place a Level 5 Thruster on the 4 blocks connected to the bearing.

Scrap Mechanic Screenshot 2020.06.27 - 20.15.16.64

12. Add the remaining Bearings one block in on the left and right sides of the boat.

Scrap Mechanic Screenshot 2020.06.27 - 20.16.02.98
Scrap Mechanic Screenshot 2020.06.27 - 20.16.16.87

13. Place Stacked Crates on the 4 exposed Bearings.

Scrap Mechanic Screenshot 2020.06.27 - 20.17.31.23

14. Place a Stacked Crate hanging off the front of the boat. This evens out the weight.

Scrap Mechanic Screenshot 2020.06.27 - 20.18.21.96

15. Add another Level 5 Thruster onto the Stacked Crate hanging off the front.

Scrap Mechanic Screenshot 2020.06.27 - 20.18.36.31

16. Add your Headlights either side of the front mounted Thruster.

Scrap Mechanic Screenshot 2020.06.27 - 20.18.57.70

17. Add the switch and the button to the boat wherever is convenient for you.

Scrap Mechanic Screenshot 2020.06.27 - 20.19.19.01

Connections[ | ]

1. Connect the rear Bearing to the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.20.06.50

2. Connect the four side Bearings to the Gas Engine

Scrap Mechanic Screenshot 2020.06.27 - 20.20.29.01

3. Connect the Gas Engine to the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.20.42.66

4. Connect the Gas Container to the Gas Engine, and both Thrusters.

Scrap Mechanic Screenshot 2020.06.27 - 20.21.03.45

5. Connect the rear Thruster to the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.21.17.70

6. Connect the front Thruster to the Button

Scrap Mechanic Screenshot 2020.06.27 - 20.21.33.32

7. Connect the Button to the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.22.08.52

8. Connect the Headlights to the Switch

Scrap Mechanic Screenshot 2020.06.27 - 20.22.16.52

9. Connect the Switch to the Driver's Seat

Scrap Mechanic Screenshot 2020.06.27 - 20.22.21.51

10. When in the water, set the side Bearings to rotate towards the front. (left counter-clockwise, right clockwise)

Scrap Mechanic Screenshot 2020.06.27 - 20.22.45.82

11. From above, set the rear Bearing to rotate counter-clockwise

Scrap Mechanic Screenshot 2020.06.27 - 20.25.24.75

12. Set both Thrusters to max power.

Scrap Mechanic Screenshot 2020.06.27 - 20.25.37.75
Scrap Mechanic Screenshot 2020.06.27 - 20.25.47.25

13. Set the Engine 4 ticks from the bottom. (not including "OFF")

Scrap Mechanic Screenshot 2020.06.27 - 20.26.01.39

Complete[ | ]

Remove the Lift, fill the Gas Container, and use your boat! Use W to go forward, A to turn left, S and 1 at the same time to move backwards, and D to turn right.

Scrap Mechanic Screenshot 2020.06.27 - 20.26.45.98

IF YOU ARE HAVING TROUBLE TURNING, remove the two blocks on the left and right of the Thruster.

Scrap Mechanic Screenshot 2020.06.27 - 20.24.30.46
Advertisement